Cutter Router
 |
 5 PC 1 2SHANK CABINET ROUTER BIT CUTTER OGEE BITS  US $48.95
|
 3 PC 1 2 SHANK CARBIDE PANEL CUttER ROUTER BIT TOOL R3 US $24.99
|
 3 PC 1 2 SHANK CARBIDE PANEL CUttER ROUTER BIT TOOL b3 US $39.99
|
 10 PCS BRASS TEMPLATE GUIDE FOR ROUTER CUTTER BITS US $25.99
|
 1PC 1 2 SH Slot Assembly Router Bit 4 Cutters Set US $32.00
|
 1pc 1 2SH Ogee Raised Panel w Back Cutter Router Bit US $17.25
|
 V Type Slotting Slot Cutter Router Bits 1 4 X 3 8 US $6.25
|
 1pc 12° Bead Raised Panel w Back Cutter Router Bit US $17.25
|
 Set Porter Cable 5 32 1 16 1 8 1 4 Slot Cutter Router US $23.45
|
 Stanley Router Bit Laminate Trim Bevel Cutter USA NEW US $5.00
|
 Cove Panel Back Cutter Carbide Router Bit Router Bits US $47.89
|
 Ogee Panel Back Cutter Carbide Router Bit Router Bits US $47.89
|
 1pc 1 2SH Convex Raised Panel w Back Cutter Router Bit US $17.25
|
 1PC 1 4 SH Slot Assembly Router Bit 4 Cutters Set US $32.00
|
 V Type Slotting Cutter Router Tool Bits 1 4 X 1 4 US $6.22
|
 Porter Cable 1 16 Slot Cutter w 1 2 Shank Arbor Router US $9.99
|
 2 PC Plywood Flat Panel Conversion Cutter Router Bit US $14.00
|
 Porter Cable 1 4 Slot Cutter w 1 2 Shank Arbor Router US $9.99
|
 Porter Cable 5 32 Slot Cutter w 1 2 Shank Arbor Router US $9.99
|
 1pc 15° Straight Raised Panel w Back Cutter Router Bit US $17.00
|
 Bosch Stile Rail Cutters Router Bit Set 1 2Shank US $7.50
|
 Neiko Tools 3 pc 1 2 Shank Ogee Cutter Router Bit Set US $49.99
|
 Neiko 5 PCS 1 2SHANK CABINET ROUTER BIT CUTTER OGEE US $48.95
|
 Freud 56 110 3 16 3 Wing Slot Cutter For 5 16 Router US $20.49
|
 OLDHAM VIPER ROUTER BITS 5 32 2 WING CUTTER 532 BC3 US $10.99
|
 Oldham Viper 526 Biscuit Cutter Router Bit 1 4 Shank US $19.99
|
 NEW Bosch 85526M 1 16 Kerf 3 Wing Slot Cutter Router B US $13.99
|
 NEW Bosch 85529M 1 8 Kerf 3 Wing Slot Cutter Router Bi US $13.99
|
 Flat Bottom Cutter Router Bit 1 2 x 7 8 US $2.45
|
 Flat Bottom Cutter Router Bit 1 2 x 3 4 US $2.37
|
 3PC 1 2 ROUTER BIT WITH CARBIDE CUTTER TIPS TOOLS B 03 US $27.99
|
 Kreg PRS4210 Router Bit 3 8 X 1 1 2 Notch Cutter NEW US $53.99
|
 3pc 1 2 Shank Ogee Cutter Router Bit Set US $47.95
|
 Amana Router Bit Slotting Cutter Assemblies3 Wing53406 US $26.95
|
 Flat Bottom Cutter Router Bit 1 2 x 1 2 US $2.21
|
 Carb Tech ¼ x ¾ Straight Cutter Router Bit ½ Shank US $6.00
|
 Router Bit Milwaukee 3 wing Slotting Cutter US $9.99
|
 3 NEW 1 2 SHANK CARBIDE PANEL CUttER ROUTER BITS R 3 US $24.99
|
 85520M BOSCH 1 4 Slotting Head Cutter Carbide Router US $15.83
|
 85624M BOSCH Beading Stile Cutter Router Bit NIB NEW US $17.59
|
 85623M BOSCH Beading Stile Cutter Router Bit NIB NEW US $17.59
|
 85506M BOSCH 1 16 Slotting Head Cutter Carbide Router US $13.19
|
 85507M BOSCH 5 16 Slotting Head Cutter Carbide Router US $15.83
|
 85648M BOSCH Flush Mount Bowl Cutter Router Bit NIB NEW US $22.49
|
 AMANA 55510 ShimFree Slot Cutter Router Bit 1 4 1 2 NEW US $106.70
|
 TC G Slot Cutter Router Bit 3 8 x 5 8 R 5206 RB3W US $31.08
|
 Bosch 82805 Arbor for 2wing Slotting cutters Bit Router US $8.90
|
 475 OLDHAM DOOR LIP CUTTER ROUTER BIT 1 1 2DIA US $59.99
|
 Bosch 85628M Replacement stile rail cutter Router Bit US $18.80
|
 Bosch 85417M Replacement Flush Cutter 4Flt Router Bit US $9.50
|
Cutter Router
Trend T4ek Router Review
Recently, Trend Machinery replaced the classic T3 Light Duty Router with the new and improved T4EK. We've been luck enough to get hold of one of these brand new machines to give it a test drive, hear in our workshop.
We definitely believe the T4 is a big step forward. The T3EK had its fair share of problems, most famously was Trend's lack of being able to make the 110volt version of the machine function as well as is should. The switch was always lacking.
Secondly the T4 is far more powerful. Performing more like a industrial power tool, far removed from the hobbyist feel of the T3. That's 550Watt compared to the far more powerful 850Watt in the T4.
As far as the build of the machine is concerned, there haven't been too many changes. The assembly still looks a little awkward, but as we all know is both well balanced and easy to control.
In use what we did notice is how much less noise and vibration, considering the more powerful motor, the machine makes. According to the spec guys at Trend the T3 creates less than 4.0 m/s2 hand arm vibration (HAV) while the T4 creates 3.0m/s2.
We've been told by Trend that the T4 is also far more reliable than the T3. We can only take there word for this as obviously we didn't have the machine long enough to burn a motor out! That said we gave it a really good run for its money.
So is it worth replacing your current router with the T4EK? That is of course an "it depends" answer. If you've recently just bought a small router, I defiantly wouldn't be rushing to the shops straight away to buy one. However if your in the market for a new router or perhaps your first purchase, I'd defiantly pick one of these up.
In some woodworking circles it was often mentioned that the T3 was marketed at the wrong crowd (budget / beginner's). Yet it was so close to being a high end tool used for small intricate jobs. It seems trend have really listened to this. They've made all the improvements the professionals and experienced users have asked for. Yet haven't alienated there core market by making it too complicated or too expensive.
In Summary the Trend T4EK is a fantastic Light duty plunge router ideal for both the hobbyist and the light trade user. If you are looking at performing heavy work on this machine I would personally go for a more powerful router such as the Makita 3612 or the Trend T5.
The T4 features a variable speed control, spindle lock and hex collar nut allows easy cutter changes. The base of the machine is removable for both carving and die grinding. The machine could also be used as pillar drill fitments. The machine also features tapped fixing holes for Trend standard guide bushes. Separate dust spout fixing holes. Adjustable twin rod side fence for guiding along a straight edge. Great machine!
About the Author
Johan Nickson is a woodwork expert at
Powertool Direct
Can a wood router, with suitable bit and jig, remove a layer of rust from my cast iron drill press table?
The important thing is that the drill press table remain absolutely flat, so I envisage a jig using two parallel steel bars, which support the router, and between which the router can also move from side to side to cover the entire surface. What type of bit/cutter is required for a router with an 8mm collet. THANKS!!!!
Would'nt use a router as a way to "mill" the table surface .
Have an unheated garage workshop & rust is a problem.
I use a sanding disc w/ scotchbrite pads instead of paper.
They do not "cut" the metal & just scrub surface rust off.
Been doing it for years & no problem w/ keeping tool surfaces true.
I use them dry & then coat the cast table surfaces w/ pastewax to protect the raw metal between uses.
Found it to be better than coating w/ oil or silicone spray .
Best regards
